This pure sine wave inverter was built to supply 230 Vac for electrical equipment of ground vehicles from the vehicle electrical system voltage of 24 Vdc.
Technical specifications
refer to data sheet: 00886
Continuous output power: | 700 VA |
Maximum output power (3 Min.): | 800 VA |
Surge rating: | 1400 VA |
Input voltage (nominal): |
24 Vdc |
Input voltage: | 21 Vdc to 30 Vdc |
Output voltage: | 230 Vac +/-3 % |
Output frequency: | 50 Hz +/-0.05 % |
Output waveform: | Pure sine wave (THD <3 %) |
Efficiency (full load): | 93 % |
No load current: | 0.6 A |
Standby current: | 0.15 A |
Input level indicator: | Red / orange/ green LED |
Load level indicator: | Red / orange/ green LED |
Failure indicator: | Red LED |
Protection: | Overload, short circuit, over- / under- input voltage, over temperature, residual-current-operated protective device (RCD) |
Safety: | EN60950 |
EMC: | EN55022:1997, EN55024:1997, EN61000-3-2:1998, EN61000-3- 3:1995 |
Electrical isolation input / output: | Insulation test voltage 500 V dc |
Temperature: | -10 °C to +40 °C (operating) -32 °C to +70 °C (storage) |
Cooling: | Convection |
Dimensions: | 426 x 160 x 141 mm (W x D x H) |
Weight: | approx. 7,5 Kg |
Protection: | IP 55 |